10 Tons Per Day Waste Tyre Pyrolysis Plant
Waste Plastic Equipment Used In Pyrolysis Method, High Quality Waste Tyre Pyrolysis equipment used in pyrolysis method
I. 10 Tons /D Waste Tyre Pyrolysis Plant Project Introduction
| Main Parts | |||
| No. | Name | Specifications | Quantity /set |
| 1 | Automatic feeder | Hydraulic type
Φ1200*3500mm |
1 |
| 2 | Rector | Φ2600*6600mm | 1 |
| 3 | Gas separator | Φ900*1500mm | 1 |
| 4 | Carbon black discharging | 1 | |
| 5 | Residual oil tank | Φ900*1260mm | 1 |
| 6 | Oil tank | Φ1200*3000mm | 2 |
| 7 | Water & gas separator | ||
| 8. | Condenser Tanks | 3 | |
| 9. | Atomization tower | Φ950*4000mm | 3 |
| 10 | Wok platform | 1 | |
| 11 | Horizontial spray conderser | Φ133*6000mm | |
| 12 | Water seal tank | 2 | |
| 13 | Cyclone dust removing device | 1 | |
| 14 | Catalyst chamber | 1 | |
| 15 | Control Cabinet | ||
|
Specifications of 10 Tons /D Waste Tyre Pyrolysis Plant Project: |
|
Raw material: Waste Tire (10 tons ) Oil output: 40%-45% (4-5tons) |
|
Carbon output: 30% (3tons) |
|
Gas out put: 10-20% (400M3); heating value:500-600 Kcal/ M3 |
|
Structure form: Horizontal |
|
Operating pressure: Constant pressure |
|
Heating material: Nature gas, coal, pyrolysis oil, wood |
|
Material of reactor: bolier steel Q245 |
|
Cooling mode: Water spray cooling |
|
Thickness of reactor: 16 mm |
|
Rotate speed of reactor: 0.4turn/minute |
|
Driving method: Gear drive |
|
Pyrolysis plant area needed: 300M2: 20(Lengthen)x15M(width)x8M(Height) You also need prepare the feeding area, about 20 M2 |
III. Advantages Of 10 Tons /D Waste Tyre Pyrolysis Plant Project
- Safety.
We have some safe devices such as the pressure gauge, alarming ring, safety valve. at the same time we have the anti-back fire device which can avoid the fire back into the reactor. - Environment protecting.
If you come to visit our company to see the running plant, you cannot even see the vapor. as we have the dust removal device and dust removal pool. - Energy saving.
Our anti-back fire device can collect the exhaust gases which can be fuels after the oil is out so is very convenient and you can save the energy .at the same time, we have the catalyst chamber which can reduce the temperature of the catalytic prolysis of the tires and plastics. so you can save lot’s of energy. except this ,we have vacuum device which let the reactor be negative pressure. So you can image. - High degree of automatic.
We have many automatically devices such as: auto-feeder, carbon black elevator, oil pumping automatic, reducing pressure automatic.
IV. Our Services
- Professional service team to provide technical support for pre-sale, sale and after-sale.
- We will provide installation instructions on your working site, test machines and provide training for your workers.
- 12 months quality warranty for main machine.
- 24 hours feedback response: solve your problems online or on your working site.
- Accessories and spare parts are available at cost price all year round.